 |
Read Me First!
This is the Spode's Abode archive. The old articles and forum have been kept here purely for historical purposes and are no longer updated.
Not all portions of this archive may work as expected.
|
|
|
|
|
|
Temperature Controlled Fan Box Written by Dr. Surlyjoe (03/Nov/02) Page 3 of 6
|
|
|
|
Untitled Document
First we gotta transplant the thermistor onto the
new wires... |
|
|
Then melt em' back to the PCB like the fan leads.
While I was doing the sensor leads (yellow), I noticed
an unused solder pad on the board (red), since this thing didn't have
RPM monitoring, I figured I'd use it for the RPM sensor lead pass through |
Here I have the pass through leads for the RPM sensor
connected up. |
|
<< Back | 1 | | 2 | | 3 | | 4 | | 5 | | 6 | Next >>
|
|
|
Copyright Andrew Miller
Please read our disclaimer
|
|
|
